rabbet
Example Sentences
Examples are provided to illustrate real-world usage of words in context. Any opinions expressed do not reflect the views of Dictionary.com.
See Examples For:
Fig. 266-27 Dado tongue and rabbet No. 28.
From Handwork in Wood by William Noyes
After the hollowing out is completed, a rabbet one-eighth of an inch wide and deep is cut to receive the deck, its outer line being g h i k, Fig.
From Harper's Young People, April 6, 1880 An Illustrated Weekly by Various
The entrance was cut out of a massive piece of rock, left thick on purpose, and on either side of the opening the edges still show the rabbet which was to receive the door.
From Manners and Monuments of Prehistoric Peoples by N. D'Anvers
Fig. 266-33 Mortise and tenon with rabbet No. 34.
From Handwork in Wood by William Noyes
It warn't a week afore he wuz runnin' a rabbet and run right into it.
From A Gentleman Vagabond and Some Others by Francis Hopkinson Smith
The end rails should be rabbeted on the inside for the latticework and the glass.
From Mission Furniture How to Make It, Part 2 by H. H. (Henry Haven) Windsor
In an end-lap joint on rabbeted pieces the joint must be adapted to the rabbet.
From Handwork in Wood by William Noyes
The corners are mitered and the backs rabbeted to receive the panels.
From Mission Furniture How to Make It, Part I by H. H. (Henry Haven) Windsor
The back rails should, in addition, be rabbeted for the back board as shown.
From Mission Furniture How to Make It, Part 2 by H. H. (Henry Haven) Windsor
For those rabbeted incisions, which he suspects in a cone, are made by the inequality of the body, and not of the superficies.
From Complete Works of Plutarch — Volume 3: Essays and Miscellanies by Plutarch
"All you need is one reasonably respectable wife," says Public Relations Wizard Gig Young, rabbeting in a plot gimmick designed to keep a flapdoodle comedy from collapsing in the first reel.
From Time Magazine Archive
Beading.—This part of the work pertains to surface finishings, and may or may not be used in connection with rabbeting.
From Carpentry for Boys In a Simple Language, Including Chapters on Drawing, Laying Out Work, Designing and Architecture With 250 Original Illustrations by James Slough Zerbe
For rabbeting and fillister work the upper holes q are used, while using ploughs the lower ones are brought into requisition.
From Modern Machine-Shop Practice, Volumes I and II by Joshua Rose
Instead of rabbeting the mirror frame, a 1/4 by 3/8-in. fillet of oak is nailed around to form the recess, the walnut frame and oak fillet making a pretty contrast.
From Mission Furniture How to Make It, Part 2 by H. H. (Henry Haven) Windsor
The sides are to be built up separately, the corners being lapped and glued after rabbeting the under arrises sufficient to let the glass in.
From Mission Furniture How to Make It, Part 2 by H. H. (Henry Haven) Windsor
